Quality wood products from around the world.
InterGlobal Forest Overview
Spanolux Fibrabel is an MDF board with a hard, fine and smoothly sanded surface. MDF Fibrabel has low formaldehyde emission (E1 class).
Moreover, MDF Fibrabel meets the requirements set by the California Air Resource Board (CARB - phase 2). According to ASTM E 1333-96, formaldehyde emission is less than 0,11 ppm, which corresponds to CARB, phase 2 as set by the ACTM.
Upon request, this MDF board can be supplied with PEFC, FSC or FSC Controlled Wood certificate.
| Sizes (ft) | 4x8 to 7.2x12 |
| Thickness (in) | 5/16 to 1 37/64 |
| Finish | Can be lacquered or finished with paper, foil, melamine, veneer or high-pressure laminate |
| Class | Type L-MDF according to EN 622-5 |
| Certs |
|
MDF Fibrabel is suitable for interior decoration, industrial processing and furniture production.
The board can be lacquered or finished with paper, foil, melamine, veneer or high-pressure laminate. The board must be applied in service class 1 (restrictions in temperature and ambient humidity) and can only be used in biological hazard class 1 of EN 335-3. The boards must be protected from any direct contact with water. They must be stacked flat, on a pallet or using a sufficient number of cross members. Boards should not be stored vertically, unless ground contact can be avoided.
The board will expand or shrink under variable humidity conditions. Use suitable sawing, milling and drilling tools.