Quality wood products from around the world.
InterGlobal Forest Overview
Higher density MDF board with a hard, fine and smoothly sanded surface and eminently millable core.
MDF Fibralux NAF has low formaldehyde emission (E1 class). Moreover, MDF Fibralux NAF meets the requirements set by the California Air Resource Board (CARB - phase 2). According to ASTM E 1333-96, formaldehyde emission is less than 0,11 ppm, which corresponds to CARB, phase 2 as set by the ACTM.
| Sizes (ft) | Max. width 8' 4.4", Max. length 20' 8" |
| Thickness (in) | 15/32 to 55/64 |
| Finish | Can be lacquered or finished with paper, foil, melamine, veneer or high pressure laminate |
| Class | Type MDF.LA according to EN 622-5 |
| Certs |
|
MDF Fibralux NAF is specifically suitable for deep routing and membrane press applications. The board can be lacquered or finished with paper, foil, melamine, veneer or high pressure laminate. MDF Fibralux NAF is also suitable for use under load conditions.
The board must be applied in service class 1 (restrictions in temperature and ambient humidity) and can only be used in biological hazard class 1 of EN 335-3. The boards must be protected from any direct contact with water. They must be stacked flat, on a pallet or using a sufficient number of cross members. Boards should not be stored vertically, unless ground contact can be avoided. The board will expand or shrink under variable humidity conditions. Use suitable sawing, milling and drilling tools.