1
2
3
4
5
6
Click here for a printer-friendly version of this page. NEATFORM™ Benefits

Some great new fabrication techniques are possible with NEATFORM™…

NEATFORM™ is used by architectural joiners / millworkers, store fixture and exhibit manufacturers, plus a wide variety of custom cabinet shops and contractors because it is better than bending plywood for smooth custom curves.

NEATFORM™ has a hard smooth MDF paint-grade surface pre-sanded to 120 grit. It is consistent in thickness (±0.15mm / ±0.006”) and bends evenly, so it forms itself precisely around custom curves without bumps or hollows.

Some great new fabrication techniques are possible with NEATFORM™ – the “double skin technique” is a particular gem, because fabricators can easily create frameless free-form curves.

NEATFORM™ Bendy MDF is now used throughout North America following 10 years of unrivalled success in Europe.

The material benefits of NEATFORM™

A uniquely flexible bending substrate.
• NEATFORM™ is mainly made from its own distinct blend of Lodgepole Pine and Sitka Spruce wood fibers.

Ready to paint and stain.
• NEATFORM™ has a hard surface, which is pre-sanded to a superb 120 grit paint-grade finish.

Excellent seam hiding qualities.
• NEATFORM™ has a thickness tolerance of ±0.15mm / ±0.006”.

Panels can be laid-up flat with veneers or laminate before bending.
• NEATFORM™ has a smooth MDF surface, which retains its integrity throughout its bending range.

Durable and great for finishing.
• NEATFORM™ is manufactured from regular 750Kg/m3 / 47lb/ft3 density MDF.

A full range of custom curves can easily be fabricated.
• Using NEATFORM™ it is possible to create bending radii as small as 150mm / 6”.

Repeatability is great and results are predictable.
• NEATFORM™ is a precisely engineered product.

Follows the intended curve without bumps or hollows.
• NEATFORM™ panels are naturally flat before bending.